Rancang Bangun Alat Pengering Bawang Merah Berbasis Mikrokontroler

Habibi Safitri; Rivaldo Juniper Bertua Simorangkir

doi:10.35447/jks.v6i1.971

Habibi Safitri Politeknik Negeri Medan
Rivaldo Juniper Bertua Simorangkir Politeknik Negeri Medan

DOI: https://doi.org/10.35447/jks.v6i1.971

Keywords: Arduino Uno, DHT11, Heater, Rotary Encoder

Abstract

Shallots exhibit heightened sensitivity to temperature and humidity compared to other onion varieties. Extreme climate change poses significant challenges for shallot farmers, leading to substantial losses. Adverse climatic conditions negatively impact the drying process, hampering its effectiveness. To address these issues, technological advancements offer opportunities for shallot farmers to optimize time, energy, and space utilization. Leveraging microcontroller technology enables the development of an efficient drying system for shallots. The utilization of the DHT11 Sensor technology proves highly advantageous in achieving quick and efficient drying of shallots. Various electronic devices and components, such as Arduino Uno, Stepdown, DHT11 Sensor, Heater, Rotary Encoder, Driver Relay, LCD, and DC Fan, are carefully integrated to construct the Onion Dryer. This innovative tool not only enhances the efficiency of the shallot drying process but also provides convenience for home-based shallot farmers. Consequently, the Onion Dryer plays a pivotal role in assisting farmers in maximizing crop yield, improving quality, and enhancing overall productivity. Moreover, the tool offers user-friendly operation, ensuring ease of use.

Downloads

Download data is not yet available.

References

[1] A. Kurnianingsih, Susilawati, and M. Sefrila, “Growth Characteristics of Shallot on Various Planting Media Composition,” J. Hortik. Indones., vol. 9, no. 3, pp. 167–173, 2019, doi: 10.29244/jhi.9.3.167-173.
[2] H. J. Edy, “Pemanfaatan Bawang Merah (Allium cepa L) Sebagai Antibakteri di Indonesia,” J. Farm. Medica/Pharmacy Med. J., vol. 5, no. 1, p. 27, 2022, doi: 10.35799/pmj.v5i1.41894.
[3] M. Zhulfa, W. Yudhistira, and J. Aprilio, “Analisis Pemanfaatan Teknologi Mikrokontrolerarduino Dalam Membantu Pemeliharaan Tanaman Sayur Pada Mediatanam Hidroponik,” Semin. Nas. Sist. Inf., vol. 5, no. 1, pp. 2879–2888, 2021.
[4] M. S. Putri and T. Taali, “Rancang Bangun Alat Pengering Biji Kakao dengan Pengendalian Kelembaban dan Suhu Berbasis Arduino Mega 2560,” JTEIN J. Tek. Elektro Indones., vol. 3, no. 1, pp. 147–157, 2022, doi: 10.24036/jtein.v3i1.224.
[5] I. Nurpriyanti, “Otomatisasi Sensor DHT11 Sebagai Sensor Suhu dan Kelembapan pada Hidroponik Berbasis Arduino Uno R3 untuk Tanaman Kangkung,” J. Teknol. dan Terap. Bisnis, vol. 3, no. 1, pp. 40–45, 2020.
[6] A. W. Jazuli et al., “Rancang Bangun Alat Pengering Emping M Berbasielinjos Arduino,” vol. 2, no. 2, pp. 1–13, 2022.
[7] V. J. Huwae, “Perancangan Mikrokontroler Embededd Web Server Untuk Sistem Kontrol Dan Monitoring Tandon Air,” JATI (Jurnal Mhs. Tek. Inform., vol. 1, no. 1, pp. 519–526, 2017, [Online]. Available: https://ejournal.itn.ac.id/index.php/jati/article/view/1958%0Ahttps://ejournal.itn.ac.id/index.php/jati/article/download/1958/1700
[8] A. A. G. Ekayana, “Rancang Bangun Alat Pengering Rumput Laut Berbasis Mikrokontroler Arduino Uno,” J. Pendidik. Teknol. dan Kejuru., vol. 13, no. 1, 2016, doi: 10.23887/jptk.v13i1.6842.
[9] M. Y. Eka, E. Adiptya, and H. Wibawanto, “Sistem Pengamatan Suhu dan Kelembaban Pada Rumah Berbasis Mikrokontroller ATmega8,” J. Tek. Elektro, vol. 5, no. 1, pp. 15–17, 2013.
[10] M. Hasnan, “Rancang bangun sistem pengering gabah dengan menggunakan arduino,” Ranc. Bangun Sist. Pengering Gabah Dengan Menggunakan Arduino, vol. 1, pp. 1–72, 2017.