Pemantauan Laju Arus Air Anak Sungai Kapuas di Tayan Hilir Berbasis IoT dan Nirkabel
Abstract
Floods are natural disasters often caused by a combination of factors such as high rainfall, clogged waterways, overflowing upstream rivers, and various other geographical and environmental aspects. This research aims to develop a water flow monitoring system to provide accurate information to the public about potential flood occurrences. This method is based on Internet of Things (IoT) technology and long-range wireless communication technology (LoRa), which provides real-time access to water flow rate information. Based on the research, the water flow sensor has maximum and minimum limits. The pipe diameter of the water flow sensor significantly affects measurement results. Testing the transducer system in a pond using a water flow sensor can measure the water flow rate. Differences in accuracy and the impact of internet network instability cause data transmission delays from the receiver device to Blynk, as Blynk continuously provides notifications. Notifications can be sent by request or automatically triggered when the water flow rate reaches 0.3 m/s. The water flow monitoring information system is integrated through Telegram.
Keywords: Blynk; Internet of Things; Long Range; Waterflow sensor; Monitoring System
Downloads
References
[2] M. A. Salim and A. B. Siswanto, “Kajian Penanganan Dampak Banjir Kabupaten Pekalongan,” Rang Teknik Journal, vol. 4, no. 2, p. 296, Jun. 2021, doi: 10.31869/rtj.v4i2.2525.
[3] R. Rizkiah, H. Poli, and S. Supardjo, “Analisis Faktor-Faktor Penyebab Banjir di Kecamatan Tikala Kota Manado,” Jurnal Spasial, vol. 1, pp. 106–107, May 2015.
[4] A. Muzakky, A. Nurhadi, A. Nurdiansyah, G. Wicaksana, and Istiadi, “Perancangan Sistem Deteksi Banjir Berbasis IoT,” Conference on Innovation and Application of Science and Technology (CIASTECH 2018), pp. 660–667, Sep. 2018.
[5] A. B. Ramadhan, S. Sumaryo, and R. A. Priramadhi, “Desain dan Implementasi Pengukuran Debit Air Menggunakan Sensor Water Flow Berbasis IoT,” e-Proceeding of Engineering, vol. 6, no. 2, pp. 1–8, Aug. 2019.
[6] A. R. F. Gani, “Sistem Peringatan Dini Banjir Berbasis Arduino Uno Dengan Notifikasi SMS,” J Teknol, vol. 9, no. 1, pp. 42–51, Nov. 2021, doi: 10.31479/jtek.v9i1.90.
[7] J. R. P. Sitindaon, D. P. Sari, and R. D. Kusumanto, “Implementasi Sistem Monitoring Air Dengan Sensor Ultrasonik Hc-Sr04 Dan Water Flow Di Asone Hidroponik Berbasis Internet of Things (IoT) Menggunakan Energi Panel Surya (PLTS),” Journal of Applied Smart Eletrical Network and System (JASENS), vol. 5, no. 1, p. 23, Jun. 2024, [Online]. Available: http://journal.isas.or.id/index.php/JASENS
[8] Salahuddin, Yusman, Zamzami, Bakhtiar, S. Munazzar, and M. Nasir, “Pengontrolan Tandon Air Berbasis IoT Menggunakan Node MCU 8266,” Jurnal Serambi Engineering, vol. IX, no. 2, p. 8787, Apr. 2024.
[9] P. J. Sihombing, E. D. Octary, and A. Amelia, “Implementasi Sensor Water Flow Pada Rumah Kos Berbasis Internet of Things (IoT),” Konferensi Nasional Social dan Engineering Polmed, no. 1, p. 968, Jan. 2025.
[10] A. D. Pangestu, F. Ardianto, and B. Alfaresi, “Sistem Monitoring Beban Listrik Berbasis Arduino NodeMCU ESP8266,” Jurnal Ampere, vol. 4, no. 1, p. 190, Jun. 2019.
[11] A. B. P. Manullang, Y. Saragih, and R. Hidayat, “Implementasi NodeMCU ESP8266 Dalam Rancang Bangun Sistem Keamanan Sepeda Motor Berbasis IoT,” JIRE (Jurnal Informatika & Rekayasa Elektronika), vol. 4, no. 2, p. 165, Nov. 2021, [Online]. Available: http://e-journal.stmiklombok.ac.id/index.php/jireISSN.2620-6900
[12] A. Pratama, A. A. N. Amrita, and D. C. Khrisne, “Rancang Bangun Sistem Monitoring Listrik Tiga Fasa Berbasis Wireless Sensor Network Menggunakan LoRa Ra-02 SX1278,” Majalah Ilmiah Teknologi Elektro, vol. 20, no. 2, p. 354, 2021, doi: 10.24843/mite.2021.v20i02.p20.
[13] M. Liandana, “Penerapan Teknologi LoRa Pada Purwarupa Awal Wearable Device,” Journal of Computer, information system, & technology management, vol. 2, no. 2, p. 41, Oct. 2019.
[14] I. M. P. Budi, E. S. Nugraha, and A. Agung, “Perancangan Dan Analisis Antena Mikrostrip Mimo Circular Pada Frekuensi 2.35 GHz Untuk Aplikasi LTE,” JURNAL INFOTEL (Informatics, Telecommunication, and Electronics), vol. 9, no. 1, p. 137, Feb. 2017, doi: 10.20895/infotel.v9i1.130.
[15] Y. Christyono, I. Santoso, and R. D. Cahyo, “Perancangan Antena Mikrostrip Array Pada Frekuensi 850 MHz,” Jurnal Ilmiah Teknik Elektro, vol. 18, no. 2, p. 88, Aug. 2016.
[16] M. Ristiawan and E. Ariyanto, “Otomatisasi Pengatur Suhu dan Waktu Pada Penyangrai Kopi (Roaster Coffee) Berbasis ATMEGA 16 Pada Tampilan LCD (Liquid Crystal Display),” Gema Teknologi, vol. 19, no. 1, p. 6, Oct. 2016.
[17] Suhadi, Ramdani, and T. Y. Rahmad, “Rancang Bangun Alat Ukur Pengisi Bahan Bakar Minyak Berbasis Arduino Uno Menggunakan Liquid Crystal Display (LCD),” Jurnal Gerbang, vol. 9, no. 1, p. 65, Feb. 2029.
[18] Kamal, Firdayanti, U. M. Tyas, A. A. Buckhari, and Pattasang, “Implementasi Aplikasi Arduino IDE Pada Mata Kuliah Sistem Digital,” Jurnal Pendidikan dan Teknologi, vol. 1, no. 1, pp. 4–5, Apr. 2023.
[19] A. Bachmid, V. C. Poekoel, and J. O. Wuwung, “Osiloskop Portable Digital Berbasis AVR ATmega644,” Jurnal Teknik Elektro dan Komputer, vol. 6, no. 1, p. 15, Apr. 2017.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
.png)
.png)
