Analisis Penerapan Perawatan pada Mesin Digester dengan Metode Overall Equipment Effectiveness (OEE) PT. XYZ
Keywords:
maintenance on a digester machine, overall equipment effictiveness, total productive maintenance
Abstract
- XYZ is a company engaged in the processing of palm oil into crude palm oil (CPO). In processing oil palm fruit, the digester machine is one of the machines that crush the loose fruit so that the pulp of the palm fruit can be separated from the nuts / seeds and this will facilitate the pressing process of the oil palm fruit in a screw press. Total productive maintenance (TPM) is a system that is useful in increasing factory productivity and the efficiency of company production by using machines / equipment effectively used to produce a product. The main purpose of implementing TPM is carried out through the overall equipment effectiveness analysis method to identify and types of damage to critical components that are the object of research and to increase the overall equipment effectiveness value as a performance measure of the results of this study. To determine the comparison of the overall equipment effectiveness value, the calculation of the effectiveness value of the digester machine is carried out using the overall equipment effectiveness method. Based on the results of data processing, it can be concluded that the overall equipment effectiveness value of the digester machine is 3.95%, which is obtained from the availability ratio of 41.24%, the performance efficiency ratio of 157.57 and the rate of quality product of 100%.
Downloads
Download data is not yet available.
References
[1] Dharmawan Setyo Kuncahyo, “PENDEKATAN PENERAPAN TOTAL PRODUCTIVE MAINTENANCE (TPM) DI STASIUN PRESS PALM OIL PADA MESIN DIGESTER DAN MESIN PRESS PT. BANGKITGIAT USAHA MANDIRI DENGAN MENGGUNAKAN INDIKATOR OEE DAN METODE FMECA (FAILURE MODE EFFECT AND CRITICAL ANALYSIS),” J. PASTI, vol. 3, pp. 436 – 450, 2015.
[2] M. Hudori, “Pengukuran Kinerja Pemeliharaan Mesin Produksi Pabrik Kelapa Sawit Menggunakan Overall Equipment Effectiveness (OEE),” Citra Widya Edukasi, vol. 11, pp. 239–252, 2019.
[3] Ilham Danoppati*, “PEMBANGUNAN SISTEM INFORMASI PEMELIHARAAN DAN KALIBRASI MESIN DI PT. NIKOMAS GEMILANG,” vol. 37, pp. 201–207, 2018.
[4] Muchtar Ginting, “ANALISA ‘TOTAL PRODUCTIVE MAINTENANCE’ TERHADAP EFEKTIVITAS PRODUKSI TONGKAT,” J. AUSTENIT, vol. VOLUME 1, no. NOMOR 2, pp. 31–37.
[5] Nofriani Fajrah1, “Analisis Performansi Mesin Pre-Turning dengan Metode Overall Equipment Effectiveness pada PT APCB,” J. Optimasi Sist. Ind., vol. 17, pp. 127–133, 2018.
[6] Dyah Ika Rinawati, “ANALISIS PENERAPAN TOTAL PRODUCTIVE MAINTENANCE (TPM) MENGGUNAKAN OVERALL EQUIPMENT EFECTIVENESS (OEE) DAN SIX BIG LOSSES PADA MESIN CAVITEC DI PT. ESSENTRA SURABAYA,” Pros. SNATIF, vol. 1, pp. 21–26, 2014.
[7] Boynard Giovinda Sitompul1, “ANALISIS OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA MESIN DIGESTER DAN PENDEKATAN 5 WHYS UNTUK PERBAIKAN PADA PT TOBA PULP LESTARI,Tbk. (Studi Kasus: PT TOBA PULP LESTARI,Tbk.),” vol. 3, pp. 1–10, 2016.
[8] Khoirul Hafiz1, “ANALISIS OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA MESIN CATERPILLAR TYPE 3512B DI PT. PLN (PERSERO) ULPLTD BAGAN BESAR PLTD BENGKALIS,” SINTEK J., vol. 13, pp. 87–96, 2019.
[9] F. H. Siregar1, A. Susilawati2, and Dodi Sofyan Arief3, “ANALISA PERFORMANCE MESIN SCREW PRESS MENGGUNAKAN METODA OVERALL EQUIPMENT EFFECTIVENESS (STUDI KASUS: PTPN V SEI PAGAR),” Jom FTEKNIK, vol. 4, pp. 1–8, 2017.
[10] Andita Rahayu, “EVALUASI EFEKTIVITAS MESIN KILN DENGAN PENERAPAN TOTAL PRODUCTIVE MAINTENANCE PADA PABRIK II/III PT SEMEN PADANG,” l Optimasi Sist. Ind., vol. 13, pp. 454–485, 2014
[2] M. Hudori, “Pengukuran Kinerja Pemeliharaan Mesin Produksi Pabrik Kelapa Sawit Menggunakan Overall Equipment Effectiveness (OEE),” Citra Widya Edukasi, vol. 11, pp. 239–252, 2019.
[3] Ilham Danoppati*, “PEMBANGUNAN SISTEM INFORMASI PEMELIHARAAN DAN KALIBRASI MESIN DI PT. NIKOMAS GEMILANG,” vol. 37, pp. 201–207, 2018.
[4] Muchtar Ginting, “ANALISA ‘TOTAL PRODUCTIVE MAINTENANCE’ TERHADAP EFEKTIVITAS PRODUKSI TONGKAT,” J. AUSTENIT, vol. VOLUME 1, no. NOMOR 2, pp. 31–37.
[5] Nofriani Fajrah1, “Analisis Performansi Mesin Pre-Turning dengan Metode Overall Equipment Effectiveness pada PT APCB,” J. Optimasi Sist. Ind., vol. 17, pp. 127–133, 2018.
[6] Dyah Ika Rinawati, “ANALISIS PENERAPAN TOTAL PRODUCTIVE MAINTENANCE (TPM) MENGGUNAKAN OVERALL EQUIPMENT EFECTIVENESS (OEE) DAN SIX BIG LOSSES PADA MESIN CAVITEC DI PT. ESSENTRA SURABAYA,” Pros. SNATIF, vol. 1, pp. 21–26, 2014.
[7] Boynard Giovinda Sitompul1, “ANALISIS OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA MESIN DIGESTER DAN PENDEKATAN 5 WHYS UNTUK PERBAIKAN PADA PT TOBA PULP LESTARI,Tbk. (Studi Kasus: PT TOBA PULP LESTARI,Tbk.),” vol. 3, pp. 1–10, 2016.
[8] Khoirul Hafiz1, “ANALISIS OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA MESIN CATERPILLAR TYPE 3512B DI PT. PLN (PERSERO) ULPLTD BAGAN BESAR PLTD BENGKALIS,” SINTEK J., vol. 13, pp. 87–96, 2019.
[9] F. H. Siregar1, A. Susilawati2, and Dodi Sofyan Arief3, “ANALISA PERFORMANCE MESIN SCREW PRESS MENGGUNAKAN METODA OVERALL EQUIPMENT EFFECTIVENESS (STUDI KASUS: PTPN V SEI PAGAR),” Jom FTEKNIK, vol. 4, pp. 1–8, 2017.
[10] Andita Rahayu, “EVALUASI EFEKTIVITAS MESIN KILN DENGAN PENERAPAN TOTAL PRODUCTIVE MAINTENANCE PADA PABRIK II/III PT SEMEN PADANG,” l Optimasi Sist. Ind., vol. 13, pp. 454–485, 2014
Published
2021-09-27
How to Cite
Tanjung, F. A. A., Nasution, F. A. K., & Irwan, A. (2021, September 27). Analisis Penerapan Perawatan pada Mesin Digester dengan Metode Overall Equipment Effectiveness (OEE) PT. XYZ. JiTEKH, 9(2), 82-90. https://doi.org/https://doi.org/10.35447/jitekh.v9i2.428
Section
JITEKH
.png)
.png)
