ANALISIS PERAWATAN (MAINTENANCE) MESIN SCREW PRESS DI PABRIK KELAPA SAWIT DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DI PT. XYZ

  • Muhammad Iqbal Pasaribu Universitas Harapan Medan
  • Din Aswan Amran Ritonga Universitas Harapan Medan
  • Ade Irwan Universitas Harapan Medan
Keywords: Failure Mode, Effect Analysis, Risk Prioryti Number, Flanned, Maintenance

Abstract

  1. XYZ is a palm oil mill . Produce crude palm oil (CPO) PT. XYZ have not implemented the system machine maintenance effectively, maintenance system that has been implemented is corrective maintenance that is make improvements when there is a break down. Besides that it is also assisted with planned maintenance scheduled every week for cleaning production machines. The refore it is necessary to identify the engine components who are prone to breakage (critical component) and necessary to do action maintenance specifically against critical components engine by applying maintenance schedule prediktif ( prevention) simulation technique, often know as estimate reliability using a random sampling scenario failure mode and effects (FMEA) defined as a process used to deter mine action to be done to guarantee each item physical or system can go well according to the function performed by its usersthen basedon data processing, replacement, inspection of turn filter componentsone time per year with atime sixty minutes, thegear box is worn outonetime per year with a time of one hundred andtwenty minutes, leaking in the engine body as much asone a year during eighty minutes, thewire caught fire one time per year with time fifty minutes, cable having problems as much one time per year with time one hundred eighty minutes.

References

[1] W. F. Ida Bagus Suryaningrat1)* and W. Amilia1), “IDENTIFIKASI RISIKO PADA OKRA MENGGUNAKAN FAILURE MODE AND EFFECT ANALYSIS (FMEA) DI PT. MITRATANI DUA TUJUH DI KABUPATEN JEMBER,” Agroteknologi, vol. 13, no. 1, pp. 25–33, 2019.
[2] M. Siti Aisyah, ST., “IMPLEMENTASI FAILURE MODE EFFECT ANALYSIS (FMEA) DAN FUZZY LOGIC SEBAGAI PROGRAM PENGENDALIAN KUALITAS,” Ind. Eng. Manag. Syst., vol. 4, no. 2, pp. 1–14, 2011.
[3] A. Suherman1, B. J. Cahyana1, and *, “Pengendalian Kualitas Dengan Metode Failure Mode Effect And Analysis (FMEA) Dan Pendekatan Kaizen untuk Mengurangi Jumlah Kecacatan dan Penyebabnya,” .umj.ac.id/index.php/semnastek, vol. 3, no. 1, pp. 1–9, 2019.
[4] D. S. Nurlailah Badariah1* and Chani Anugerah3, “PENERAPAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DAN EXPERT SYSTEM (SISTEM PAKAR),” umj.ac.id/index.php/semnastek, vol. 4, no. 1, pp. 1–10, 2016.
[5] Purwo Subekti, “ANALISA KERUSAKAN SHORT DRIVE SHAFT KEMPA ULIR PADA PABRIK KELAPA SAWIT,” , Jur. Mesin dan Peralat. Pertan. - Univ. Pasir Pengaraian, vol. 3, no. 1, pp. 35–45, 2010.
[6] D. Y. Hafidh Munawir and J. T. I. UMS, “ANALISA PENYEBAB KERUSAKAN MESIN SIZING BABA SANGYO KIKAI DENGAN METODE FMEA DAN LTA (STUDI KASUS DI PT PRIMATEXCO INDONESIA),” Nas. IENACO, vol. 4, no. 2, pp. 296–302, 2016.
[7] E. W. B. S. Ir. T. Hasballah)* and U. D. A. Dosen Prog. Studi Teknik Mesin, “Pengaruh Tekanan Screw Press Pada Proses Pengepresan Daging Buah Menjadi Crude Palm Oil,” J. DARMA AGUNG, vol. XXVI, no. 1, pp. 722–729, 2018.
[8] C. P. Surya Andiyanto1), Agung Sutrisno2), “PENERAPAN METODE FMEA (FAILURE MODE AND EFFECT ANALYSIS) UNTUK KUANTIFIKASI DAN PENCEGAHAN RESIKO AKIBAT TERJADINYA LEAN WASTE,” Online Poros Tek. Mesin, vol. 6, no. 1, pp. 45–57, 2010.
[9] R. A. Rinaldi 1), Siswo Pranoto 2), “Studi Eksperimen Karakteristik Mekanik Material Screw Press Kapasitas 10-14 Ton/Jam Di Lingkungan Pabrik Kelapa Sawit,” SURYA Tek., vol. 1, no. 4, pp. 1–8, 2016.
[10] D. R. S. T. Dejoi Irfian Situngkir*, Golfrid Gultom, “Pengaplikasian FMEA untuk Mendukung Pemilihan Strategi Pemeliharaan pada Paper Machine,” Tek. MESIN UNTIRTA, vol. 5, no. 2, pp. 39–43, 2019.
Published
2021-10-09