Analisa Karakteristik Penggaturan Kerja Operator Terhadap Pencapaian Keluaran Produksi
Abstract
This research is to find out the characteristics of one of the companies taken in one journal that shows the 100% display check output data in a period of 1 week, summary output from 5 operators in 1 week and summary of output / day and number of types of output checked / days. Where the results obtained have differences in suitability of the operators doing work in the week. So by analyzing the 100% display checking process, we will find the causes of output variations and possible ways to minimize the output variation. By reducing the output variation, it is expected that the output of 100% checking will be more stable and increase compared to the previous output. The end result is customer satisfaction with the fulfillment of customer demand for goods ordering and reduction in the company's operational costs related to the reduction in the number of employees
Downloads
References
[2] J. Junaidi, S. Hestukoro, A. Yanie, J. Jumadi, and E. Eddy, “IMPLEMENTATION ANALYSIS of CUTTING TOOL CARBIDE with CAST IRON MATERIAL S45 C on UNIVERSAL LATHE,” in Journal of Physics: Conference Series, 2017, vol. 930, no. 1.
[3] D. J. M.RINOZA1, M AGUNG PRATAMA2, “STUDI KASUS AUDIT MAINTENANCE MESIN PEMINDAH BAHAN MATERIAL HANDLING DIPABRIK TEKSTIL,” TEKNOLOGI, pp. 1–5, 2018.
[4] S. Hestukoro, I. Roza, and D. Morfi Nst, “Process Analysis of High Speed Steel Cutting Calculation (HSS) with S45 C Material on Universal Machine Tool,” Int. J. Innov. Sci. Res. Technol., vol. 3, no. 1, 2018.
[5] B. T. S. Junaidi1, Angri Abdirullah2, “CHARACTERISTIC ANALYSIS OF KNAF FIBER WITH IMPACT LOADING FOR DESIGN WITH SPECIFICATIONS SIZE 80 / 20.70 / 30.60 / 40.50 / 50.40 / 60,” STASTIKA, vol. 1, no. 1, p. 2019, 2019.
[6] T. Siagian, I. Siregar, and H. Lubis, “Characteristics of St.37 Steel Materials with Temperature and Time on Heat Treatment Test using Furnace,” 2018.
[7] S. Hestukoro, T. Siagian, A. Bukhori, I. Roza, and I. Siregar, “Characteristics of Silicon Aluminum Material Based on Fracture Period In Torque Test.”
[8] B. T. S. FAHRIZA TRI RIZKI1, ANGGRI ABDIRULLAH2, “ANALISA KEKUATAN PEMBUBUTAN MATERIAL S45C MENGGUNAKAN PAHAT CARBIDE,” TEKNOLOGI, pp. 1–9, 2018.
[9] S. H. junaidi, weriono, indra roza, “Economic Planning Analysis of MHP PLTMH Using Pico-hydro Turbine: Hundreds of watts - 5 KW,” IJISRT (International J. Innov. Sci. Res. Technol., vol. 3, no. 2, pp. 112–116, 2018.
[10] J. WALUYO, “PENGARUH PUTARAN SPINDEL UTAMA MESIN BOR TERHADAP KEAUSAN PAHAT BOR DAN PARAMETER PENGEBORAN PADA PROSES PENGEBORAN DENGAN BAHAN BAJA,” TEKNOLOGI, vol. 3, no. 2, pp. 139–144, 2010.
[11] A. H. H. Ahmad Yani1, Junaidi2, M. Irwanto3, “Optimum reactive power to improve power factor in industry using genetic algortihm,” Indones. J. Electr. Eng. Comput. Sci., vol. 14, no. 2, pp. 751–757, 2019.
[12] A. H. Pohan, “PENGUJIAN EKSPERIMENTAL DAN SIMULASI ANSYS PERFORMANSI POMPA SENTRIFUGAL RANGKAIAN SERI DAN PARALEL,” J. Sist. Tek. Ind., vol. 20, no. 2, pp. 29–35, 2018.
[13] H. K. JUNAIDI1 , TONY SIAGIAN2 , Anggri Abdirullah3 , Aji Surahman 4, “CALCULATION ANALYSIS OF CUTTING STYLE IN MIXING PROCESS TOWARDS MATERIALS WITH SPEED CARBIDE USING CHARACTERISTICS,” TEKNOLOGI, vol. 19, no. 1, pp. 1–19, 2019.
[14] B. T. S. FAHRIZA TRI RIZKI1, ANGGRI ABDIRULLAH2, “ANALISA KEKUATAN PEMBUBUTAN MATERIAL S45C MENGGUNAKAN PAHAT CARBIDE,” TEKNOLOGI, pp. 1–9, 2018.
[15] JUNAIDI, “Hasil Perhitungan Daya Elektro Motor Pada Pahat Potong HSS dan Benda Uji Karbon S45 C Dengan waktu 4 jam yang digunakan Pada Mesin Bubut Universal,” SAINTEK Fak. Tek. UISU MEDAN, vol. 1, no. 1, pp. 46–51, 2014.
