Model Monitoring IoT Menggunakan Logika Fuzzy Untuk Prediksi Tingkat Kelelahan Mesin Real-Time
Keywords:
Fuzzy Logic, Akuarium, Internet of Things, Machine Fatigue, Preventive Maintenance, ISOAbstract
Modern industrial technology development demands high efficiency levels and zero downtime for production machinery. The phenomenon of machine fatigue, which accumulates due to excessive workload without early detection, frequently triggers sudden catastrophic failures. This study aims to propose an intelligent monitoring model based on Internet of Things (IoT) technology integrated with fuzzy logic to detect machine fatigue in real-time. A DS18B20 temperature sensor and an MPU6050 accelerometer vibration sensor are implemented on the physical layer to perform actual data acquisition aligned with ISO 10816-3 standard. These physical parameters are then transmitted to a cloud server via the MQTT protocol, where the Mamdani fuzzy logic method processes the inputs to generate the machine's status. The research results show that this model successfully detects and classifies machine fatigue into Safe, Warning, and Danger statuses with 100% prediction accuracy matching MATLAB simulations, and demonstrates an average transmission latency of 0.86 seconds (well below 1.2 seconds). This system is proven reliable to be integrated as a key decision part of preventive maintenance strategy in modern manufacturing.
Downloads
References
A. P. Harianja, S. Pakpahan, and C. A. Situmorang, “Dampak Perkembangan Teknologi 5G Di Bidang Komunikasi Dan Internet Of Things (IoT) Pada SMK Skylandsea Deliserdang,” ULEAD J. e-Pengabdian, vol. 3, no. 2, pp. 47–51, 2024.
Dwi Oktareza, Andreyan Noor, Erliyando Saputra, and Aulia Vivi Yulianingrum, “Transformasi Digital 4.0: Inovasi yang Menggerakkan Perubahan Global,” Cendekia J. Hukum, Sos. dan Hum., vol. 2, no. 3, pp. 661–672, 2024, doi: 10.70193/cendekia.v2i3.98.
F. Civerchia, S. Bocchino, C. Salvadori, E. Rossi, L. Maggiani, and M. Petracca, “Industrial Internet of Things monitoring solution for advanced predictive maintenance applications,” J. Ind. Inf. Integr., vol. 7, pp. 4–12, Sep. 2017, doi: 10.1016/j.jii.2017.02.003.
N. Kamide, “Sequential Fuzzy Description Logic: Reasoning for Fuzzy Knowledge Bases with Sequential Information,” Proc. Int. Symp. Mult. Log., vol. 2020-Novem, pp. 218–223, 2020, doi: 10.1109/ISMVL49045.2020.000-2.
M. S. Hossain and G. Muhammad, “Cloud-assisted Industrial Internet of Things (IIoT) - Enabled framework for health monitoring,” Comput. Networks, vol. 101, pp. 192–202, Jun. 2016, doi: 10.1016/j.comnet.2016.01.009.
G. Helbing and M. Ritter, “Deep Learning for fault detection in wind turbines,” Renew. Sustain. Energy Rev., vol. 98, pp. 189–198, Dec. 2018, doi: 10.1016/j.rser.2018.09.012.
A. Eremeev, S. Ivliev, and A. Kozhukhov, “Tool Environment for Creating Training Prototypes of Intelligent Decision Support Systems,” 2020 5th Int. Conf. Inf. Technol. Eng. Educ. Inforino 2020 - Proc., pp. 7–10, 2020, doi: 10.1109/Inforino48376.2020.9111781.
R. Zhao, R. Yan, Z. Chen, K. Mao, P. Wang, and R. X. Gao, “Deep learning and its applications to machine health monitoring,” Mech. Syst. Signal Process., vol. 115, pp. 213–237, Jan. 2019, doi: 10.1016/j.ymssp.2018.05.050.
X. Xu, T. Chen, and M. Minami, “Intelligent fault prediction system based on internet of things,” Comput. Math. with Appl., vol. 64, no. 5, pp. 833–839, Sep. 2012, doi: 10.1016/j.camwa.2011.12.049.
Muhammad and M. F. Siregar, “Fuzzy logic to adjust room temperature depending on the number of people,” J. Mantik, vol. 7, no. 1, pp. 2685–4236, 2023.
M. Furqon Siregar and M. F. Siregar, “Utilizing fuzzy logic to create a prototype robot for load detection,” Mantik J., vol. 7, no. 4, pp. 2685–4236, 2024.
A. Aboshosha, A. Haggag, N. George, and H. A. Hamad, “IoT-based data-driven predictive maintenance relying on fuzzy system and artificial neural networks,” Sci. Rep., vol. 13, no. 1, pp. 1–13, 2023, doi: 10.1038/s41598-023-38887-z.
S. S. Harahap, R. R. M. Salim, and T. Y. Harjatanaya, “Pemanfaatan AI (Artificial Intelligence) dalam Pengenalan Kebinekaan Indonesia di Sekolah,” J. PkM (Pengabdian Kpd. Masyarakat), vol. 7, no. 6, p. 825, 2025, doi: 10.30998/jurnalpkm.v7i6.26411.
S. S. Harahap, W. S. Simamora, and R. R. Hadistio, “Implementation of Fuzzy Logic in Detecting Air Temperature Based on Microcontroller,” Brill. Res. Artif. Intell., vol. 3, no. 2, pp. 155–161, 2023, doi: 10.47709/brilliance.v3i2.3023.
M. F. Siregar and Chairul Imam, “Application of the Fuzzy Logic Method in Determining the Volume of Water Discharge to the Number of Humans Based on a Microcontroller,” J. Sci. Technol., vol. 4, no. 1, pp. 187–192, 2022, doi: 10.55299/jostec.v4i1.260.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Muhammad Furqon Siregar, Siti Sarah Harahap
This work is licensed under a Creative Commons Attribution 4.0 International License.
Universitas Harapan Medan
.png)
.png)
.png)
.png)
.png)
