ANALISA PENGUJIAN KEKERASAN MATERIAL BAJA KARBONRENDAH DAN BESI MENGGUNAKAN METODE UJI BRINNEL

  • Junaidi Junaidi Universitas Harapan Medan
  • Ade Irawan Universitas Harapan Medan
DOI: https://doi.org/10.35447/jitekh.v7i2.725
Keywords: Low carbon steel, iron, brinnel hardness test

Abstract

Steel is iron with a carbon content of less than 2%. Steel can be formed into various shapes according to needs. Broadly speaking there are 2 types of steel, namely carbon steel and alloy steel. Carbon steel is divided into low carbon steel, medium carbon steel and high carbon steel. The classification of steel is significantly influenced by composition, structure and use. ST 37 iron is classified as low carbon steel, which has less carbon content according to specifications of 0.16%. This steel is also often used for machine constructions that rub against each other such as gears, shafts. Steel has mechanical properties, one of which is hardness. To determine the hardness value, the brinnel test method, the Vickers method and the Rockwell method are used. In this study, the brinnel method will be used, where the materials to be tested are low carbon steel and iron. This test can see the material hardness value of low carbon steel and iron so that it can be applied according to its function.

Downloads

Download data is not yet available.

References

[1.] Fauzan, 2013.”Pengujian keras brinell vickers”. Dapat di unduh di http://kalogueloe.blogspot.com/2013/03/pengujian-keras-brinell-vickers. html.
[2.] Woro sekar, Fx kristianta, Sumarji. 2014. Pengaruh repeated normalizing pada side frame berbahan baja AAR MO01GRADE B+ terhadap perubahan sifat mekanik dan struktur mikro , jurnal teknik mesin
[3.] Zuchry. 2012. “Mekanika Teknik, Universitas Tadulako, Palu”. Dapat diunduh di http://eprints.undip.ac.id/38886/1/Alat_Uji_Impak_Charpy.pdf.
[4.] Yopi. 2013. ”Uji kekerasan material”.Dapat di unduh http://yopiprayoga.blogspot.com/2013/04/v-behaviorurldefaultvmlo.html.
[5.] Bayu Adie S dan Yudi S. 2013. Pengaruh media pendingin pada heat treatment terhadap Struktur mikro dan sifat mekanik fictionwedge AISI 1340
[6.] Rida sulistio. 2007. Pengaruh proses normalizing terhadap sifat mekanis baja S.34c. jurnal mechanical engineering.
[7.] Husni. 2009. “Ujikekerasan”.Dapat di unduh di http://belajarmetalurgi.blogspot.com/2009/11/uji-kekerasan.html.
Published
2019-09-30
How to Cite
Junaidi, J., & Irawan, A. (2019, September 30). ANALISA PENGUJIAN KEKERASAN MATERIAL BAJA KARBONRENDAH DAN BESI MENGGUNAKAN METODE UJI BRINNEL. JiTEKH, 7(2), 57-61. https://doi.org/https://doi.org/10.35447/jitekh.v7i2.725
Issue
Vol 7 No 2 (2019): September 2019
Section
JITEKH
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Most read articles by the same author(s)

1 2 > >>