ANALISIS PENERAPAN PROGRAM KESELAMATAN KERJA DALAM USAHA MENINGKATKAN PRODUKTIVITAS KERJA DENGAN PENDEKATAN FAULT TREE ANALYSIS DAN HAZARD AND OPERABILITY STUDY
Abstract
PT. Sumatra Hakarindo in its operation is not free from problems encountered such as work accidents, occupational diseases and the negative impact of the industry on the surrounding environment, so the level of human work safety as a factor of production is needed so that optimal productivity can be achieved. The application of work safety programs for workers is an important supporting effort in production activities. The work safety program system consists of several program elements and their supporters. In this study the measurement of the results of work safety efforts and the safe T value, the frequency level to express the number of accidents that occur every 1,000,000 hours worked from the employee's "work hours" home. The safe T value is a measurement that aims to compare the results of the accident reduction rate achieved for that work. From the implementation of the Occupational Health program at PT. Sumatra Hakarindo can be said to have been implemented quite well. Accidents that occurred in 2018 -2020 were 15,13,11 accidents. With a frequency rate from 2018-2020 it is 64.6; 49.9; 36,1. The severity level that occurred in 2016-2018 was 458.9; 284.2; 233,2. With a safe T value in 2018 it is known - 950.2 in 2019 it is - 1098.2. The decrease in accident rates and the severity of accidents from year to year will increase labor productivity.
Downloads
References
[2] M. Yusuf, “Analisis Risiko Bahaya dan Kajian K3 Pada Proses Produksi Transformer di PT. Nikkatsu Electric Work dengan menggunakan Metode HIRARC,” 2017.
[3] W. A. Setiono, “Dengan Metode Hazard And Operability (Hazop) Di Bengkel Dan Laboratorium Teknik Instalasi Tenaga Listrik Smk N 2 Wonosari,” Universitas Negri Yogyakarta, 2017.
[4] H. Sarjono, “Model Pengukuran Produktivitas Berdasarkan Pendekatan Rasio Output Per Input,” The WINNERS, vol. 2, 2001.
[5] D. W. Pratiwi and Widiyanto, “Economic Education Analysis Journal Pengaruh Faktor Internal Dan Faktor Eksternal Terhadap Produktivitas Kerja Info Artikel,” 2018. [Online]. Available: http://journal.unnes.ac.id/sju/index.php/eeaj
[1] B. Sayoto et al., “Pengaruh Disiplin Kerja Dan Fasilitas Kerja Terhadap Produktivitas Kerja Karyawan Mnctv Bagian Produksi Herry Winarto 2) 2),” Mei-Agustus, 2018.
[2] M. Yusuf, “Analisis Risiko Bahaya dan Kajian K3 Pada Proses Produksi Transformer di PT. Nikkatsu Electric Work dengan menggunakan Metode HIRARC,” 2017.
[3] W. A. Setiono, “Dengan Metode Hazard And Operability (Hazop) Di Bengkel Dan Laboratorium Teknik Instalasi Tenaga Listrik Smk N 2 Wonosari,” Universitas Negri Yogyakarta, 2017.
[4] H. Sarjono, “Model Pengukuran Produktivitas Berdasarkan Pendekatan Rasio Output Per Input,” The WINNERS, vol. 2, 2001.
[5] D. W. Pratiwi and Widiyanto, “Economic Education Analysis Journal Pengaruh Faktor Internal Dan Faktor Eksternal Terhadap Produktivitas Kerja Info Artikel,” 2018. [Online]. Available: http://journal.unnes.ac.id/sju/index.php/eeaj
[6] M. Firman Prayogi, D. Puspita Sari, and A. Arvianto, “Analisis Penyebab Cacat Produk Furniture Dengan Menggunakan Metode Failure Mode And Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta) (Studi Kasus Pada Pt. Ebako Nusantara),” Indutsrial Engineering Online Journal, vol. 5, 2016.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
